| PART # | Suffix | DESCRIPTION | PRICE |
| 1 | locknuts for front qr axle pair | £3.60 | |
| 19 | axle q/r front bare | £6.00 | |
| 33 | locknuts for rear qr axle pair | £3.60 | |
| 61 | curved lever only for qr skewer | £3.60 | |
| 64 | bare skewer rod front | £4.70 | |
| 65 | bare skewer rod rear for 5spd, also have 6spd | £4.70 | |
| 80 | /2 | gear hanger for plain ends | £10.00 |
| 82 | /A | bronze bush for main arms NR mech set of 4 | £4.70 |
| 84 | bolt for return spring NR/SR | £2.40 | |
| 88 | tab washer-gear cable clamp | £1.20 | |
| 89 | bolt-cable clamp f.mech | £1.20 | |
| return spring-NR/SR late model held by lower rivet | £2.40 | ||
| 99 | adjuster screw NR | £1.20 | |
| 120 | /1 | top spring-for NR adjuster screw | £1.20 |
| 190 | /04 | inner plastic washer for gear lever (old #661) pr | £4.50 |
| 190 | /06 | outer plastic washer for gear lever pr | £1.20 |
| 600 | /2 | backplate/stop for gear lever RH | £1.20 |
| 603 | chrome outer cover with 2 flats in centre hole for early downtube levers pair | £2.40 | |
| 604 | slot head tension screw for d/t levers pair | £1.20 | |
| 604 | /1 | D ring tension wingnuts for d/t levers pair | £9.70 |
| 611 | /2 | backplate/stop for gear lever LH | £1.20 |
| 646 | rubber outer washer-pump head | £1.20 | |
| 669 | 770 | pedal spindles NR, 14x1.25 FRENCH thread pair | £6.00 |
| 672 | bearing cup for NR pedal | £6.00 | |
| 673 | tab washer-pedal | £1.20 | |
| 674 | cone-NR pedal | £6.00 | |
| 678 | chrome dust seal inner for pedal | £2.40 | |
| 684 | top race for headtube NR headset | £3.60 | |
| 698 | front bridge for 2bolt seatpost | £8.30 | |
| 699 | rear bridge for 2bolt seatpost | £8.30 | |
| 700 | tubular nut for 2 bolt seatpost | £2.40 | |
| 703 | bolt for 2 bolt seatpost-screws in to #700 | £4.70 | |
| 737 | inner bearing shell-front hub | £4.70 | |
| 738 | inner bearing shell-rear hub | £4.70 | |
| 741 | oiler hole spring clip for Record hubs pair | £7.00 | |
| 745 | /A O/Size | fixed cup thick wall Italian OVERSIZE 36.5mm-use to rectify stripped BB thread | £14.00 |
| 747 | lockring for LH cup Ital OVERSIZE 36.5mm | £4.70 | |
| 748 | 749 | crank fixing bolt and washer silver pair | £10.00 |
| 773 | /1 | hinged band and 773/2 rivet-f.mech | £5.90 |
| 774 | 775 | adjusting screw and spring for front mech | £2.40 |
| 785 | bronze bush-f.mech | £1.20 | |
| 786 | rivet-outer arm to cage of f.mech | £1.20 | |
| 787 | return spring black or chrome | £2.40 | |
| 788 | bolt-cage shank & 217 nut-f.mech | £1.20 | |
| 790 | 215,217 | spacer, bolt & nut-end of chain cage-f.mech | £3.60 |
| 805 | /A | upper main body-NR rear mech | £3.60 |
| 806 | /A | outer arm-NR rear mech-make whizzy key fob! | £6.00 |
| 807 | /A | inner arm-NR rear mech | £6.00 |
| 810 | /1A | metal or nylon bush on tension spring-NR/SR/Rally | £1.20 |
| 810 | /A | lower main body spring cage-NR/Rally rear mech | £3.60 |
| 811 | /A | lower bolt-passes thro' main tension spring NR | £9.40 |
| 812 | /1A | anti-rotation stop screw-NR/SR rear mech | £1.20 |
| 813 | /A | main tension spring-NR/SR/Rally mech | £8.30 |
| 815 | /A | inner jockey cage plate NR/SR | £12.00 |
| 941 | circlip-f.mech | £1.20 | |
| 1160 | 01/02/03/04 | upper & lower clamps, bolt and washer for SR 2nd gen. seatpost total 4 pieces | £15.00 |
| 1160 | 01/04 | bolt and convex washer for SR seatpost 1 of each | £3.60 |
| 1273 | dust cover for Nuovo Tipo rear hub | £2.40 | |
| 2004 | square washer-cable clamp | £2.40 | |
| 2005 | eccentric bush | £3.60 | |
| 2006 | q/r lever dome end | £12.00 | |
| 2013 | cable clamp shaft | £2.40 | |
| 2016 | domed/acorn nut for front of brake caliper-this is a repro stainless steel nut, but better than a rusty original | £1.20 | |
| 2019 | cable clamp side brake arm std. drop | £12.00 | |
| 2020 | /02 | adjuster side brake arm shallow drop | £12.00 |
| 2021 | knurled washer on front of brake arms | £2.40 | |
| 2024 | rubber rings for brake adjuster black or WHITE pr | £5.00 | |
| 2033 | 2037 | clamp band with nut & washer for brake lever pair | £15.00 |
| 2034 | spindle for brake lever inside hood pair | £3.60 | |
| 2036 | grub screw inside brake lever pair | £2.40 | |
| 2041 | rondella dentata serrated washer for brake SILVA pair | £3.60 | |
| 3349 | chrome cap for #3346 pump head | £1.20 | |
| 3505 | lower bolt passes thro mainspring hexag Gran Sport | £1.20 | |
| 4002 | upper body-black for SR rear mech | £6.00 | |
| 4003 | lower main body spring cage-black for SR rear mech | £6.00 | |
| 4007 | upper spring-SR gear adjuster | £1.20 | |
| 4009 | ribbed cover for tension spring SR rear mech | £2.40 | |
| 4026 | bearing cup for SR pedal | £6.00 | |
| 4027 | cone-SR pedal | £6.00 | |
| 4045 | top race for headtube-SR Strada headset | £3.60 | |
| 1119003 | 7119009 | inner & outer jockey cage plates SR MK2 rear mech | £25.60 |
| 7161120 | tapered shape closed nut for Victory brake pair | £4.80 | |
| 7161139 | alloy brake adjuster wheel Vic/Tri pair | £2.40 | |
| 7161142 | tapered shape open nut for Triomphe brake pair | £4.80 | |
| 7182039 | Triomphe f.mech body & clamp | £1.20 | |
| Ergonomic pedal plate Left hand only | £10.00 | ||
| 7281066 | 7281067 | RH & LH pedal spindles for Victory/Triomphe pair | £2.40 |
| 7350113 | 7161015 | jockey wheel bolt and nut for SR mech 2 of each | £3.00 |
| 7350115 | 7300105 | bolt & shaped spacer for NR/SR braze on f.mech | £2.40 |
| BR-CH001 | brake adjuster stem & wheel with rubber ring, similar shape to NR and a cheaper alternative | £8.00 | |
| Athena outer jockey cage plate, cut-out only around lower wheel, appears to be in 1988 cat. | £1.20 | ||
| Chorus outer jockey cage plate, description as above | £1.20 | ||
| C-Record outer jockey cage plate C cutout | £17.50 | ||
| Croce d'Aune model SM outer jockey cage plate | £12.00 | ||
| black plastic seal on fork crown race-Record OR h/set | £1.20 | ||
|
I would appreciate a minimum order of £5 for these spares. However if you order any item from the main list, you can buy a solitary rivet if you wish. |
02/07/2010 | ||